Capabilities

Our gauge and transducer calibration services cover a range of disciplines, including torque, force, pressure, flow, mass/weight and acceleration.


Calibration Torque

Torque calibration

We provide calibration of tools and gauges measuring torque. Typical instruments are

  • Torque wrench
  • Torque screwdriver
  • Torque transducer
  • Torque multiplier
  • Torque testers.

 

 


Calibration Force load cell

Force calibration

We calibrate toolls and gauges within force. Typical instruments are

  • Load Cells
  • Dead Weights
  • Force Gauges
  • Digital Indicators
  • Proving Rings

 

 


Calibration Pressure 2 640x480

Pressure gauge calibration

We calibrate pressure gauges and transducers. Typical gauges are

    • Manometer
    • Micro Manometer
    • Pressure Transducer or Transmitter
    • Digital Pressure Indicator
    • Air Data Test Set (Pitot Static)
    • Barometer
    • Vacuum Meter
    • Pressure Calibrator
    • Dead Weight Tester

Calibration Flow

Flow meter calibration

We calibrate flow meters measuring gas flow and mass flow. Typical gauges are

  • Volume Flow Meter
  • Mass Flow Meter
  • Flow Controller
  • Flow Pipe
  • Rotary Meter
  • Slit Sampler
  • Air Sampler
  • Bubble Flow Meter
  • VA Flow Meter
  • Leakage Tester
  • Glove Test Unit

Flow meter adjustment and correction data

An additional service we provide is the adjustment or input of correction data in most types of gas flow measuring equipment, as well as slit- and air samplers.

 


Calibration Mass Weight Scale

Calibration of weights and scales

Element Metech provides traceable and accredited calibration of scales and weights.

Mass also creates other elements, such as torque and pressure, and we also perform calibration of scales used in these areas. 

Scale adjustment

As an additional service we also provides adjustment of most types of scales and weights.

 

 


Calibration Force load cell

Accelerometer calibration

At our Linköping site we have now Scandinavia´s most complete automated Accelerometer Calibration System. This makes us a market leader when it comes to calibration within Acceleration & Vibration.

Our state of the art Accelerometer Calibration System is a fully automated Calibration system using FFT signal analysis. It provides:

  • Accurate back-to back comparison calibration of accelerometers according to ISO 16063-21
  • Traceable calibration using an Air-Bearing Shaker within a frequency range of 5 to 15000 Hz
  • Shock Calibration with shock exciter according to ISO 16063-22 and Impact Hammer calibration
  • Thorough capability for all accelerometer types, and ability to update TEDS-data
  • Calibration of ICP (IEPE), charge mode piezoelectric, piezoresistive, capacitive, velocity (V) and CVLD (A) sensors. Machine monitoring equipment and vibration meter calibration.

Specifications table:

 

 

As a full-service provider, Element Metech is the single point of contact for all your instrument calibration, service and administration needs. We are vendor independent and able to support all manufacturers and instrument types. Our well-equipped laboratories conduct ISO/IEC 17025 accredited or traceable calibration at the right quality level according to your needs and requirements. Several accreditaions are also valid for on-site calibration services. 

calibration services

 

Our calibration capabilities and accreditations cover a wide range of disciplines. Browse the categories below to find more detailed information.


We take pride in of our flexibility and broad capabilities. If the requested service is not available close to your location we will arrange the necessary logistics within Element Metech to help you with all your calibration, service and measuring needs.

Element Metech is the go-to team for all your calibration needs.

Contact our team

We take pride in of our flexibility and broad capabilities. If the requested service is not available close to your location we will arrange the necessary logistics within Element Metech to help you with all your calibration, service and measuring needs.

Element Metech is the go-to team for all your calibration needs.

Contact our team

We take pride in of our flexibility and broad capabilities. If the requested service is not available close to your location we will arrange the necessary logistics within Element Metech to help you with all your calibration, service and measuring needs.

Element Metech is the go-to team for all your calibration needs.

Contact our team

Element Metech provides traceable and accredited calibration for Electrical DC/LF or Electrical RF/Microwave (HF) instruments up to 50 GHz. We are vendor independent and able to support all manufacturers and instrument types.

Typical instrument types

  • Multimeter
  • Electronic load
  • Calibrator
  • Coils
  • Resistors
  • Capacitors
  • Clip-on ammeters
  • Shunt
  • Power Supply
  • High voltage
  • Megger
  • ESD
  • Oscilloscope
  • Oscillator
  • Audio Analyzer
  • Distortion Analyzer
  • Function Generator
  • Pulse Generator
  • Logic Analyzer
  • Bit Error Rate Tester
  • FFT Analyzer
  • Medical
  • Avionic
  • Signal Generator
  • Sweep Generator
  • Network Analyzer
  • Spectrum Analyzer
  • Modulation Analyzer
  • Communication Test Set
  • Power Meter
  • Power Sensor
  • Counter
  • Amplifier
  • Attenuator
  • EMC
 

Service

We take pride in of our flexibility and broad capabilities. If the requested service is not available close to your location we will arrange the necessary logistics within Element Metech to help you with all your calibration, service and measuring needs.

Element Metech is the go-to team for all your calibration needs.

Contact our team

Element Metech provides traceable and accredited calibration for Electrical DC/LF or Electrical RF/Microwave (HF) instruments up to 50 GHz. We are vendor independent and able to support all manufacturers and instrument types.

Typical instrument types

  • Multimeter
  • Electronic load
  • Calibrator
  • Coils
  • Resistors
  • Capacitors
  • Clip-on ammeters
  • Shunt
  • Power Supply
  • High voltage
  • Megger
  • ESD
  • Oscilloscope
  • Oscillator
  • Audio Analyzer
  • Distortion Analyzer
  • Function Generator
  • Pulse Generator
  • Logic Analyzer
  • Bit Error Rate Tester
  • FFT Analyzer
  • Medical
  • Avionic
  • Signal Generator
  • Sweep Generator
  • Network Analyzer
  • Spectrum Analyzer
  • Modulation Analyzer
  • Communication Test Set
  • Power Meter
  • Power Sensor
  • Counter
  • Amplifier
  • Attenuator
  • EMC
 

Service

We take pride in of our flexibility and broad capabilities. If the requested service is not available close to your location we will arrange the necessary logistics within Element Metech to help you with all your calibration, service and measuring needs.

Element Metech is the go-to team for all your calibration needs.

Contact our team

We take pride in of our flexibility and broad capabilities. If the requested service is not available close to your location we will arrange the necessary logistics within Element Metech to help you with all your calibration, service and measuring needs.

Element Metech is the go-to team for all your calibration needs.

Contact our team

Our calibration services are performed at any of our service centres or on-site. As a supplier, we are certified according to ISO 9001 and our accredited laboratories are accredited by Accreditation Bodies according to ISO/IEC 17025.

Our services are designed to help you as a customer to fulfil the requirements that have been put on maintenance and calibration of your measuring instruments. All the services provide metrological confirmation of the measuring instrument that fulfils the requirements in standards as ISO 9000 and ISO 10012.

Accredited Calibration

When you need measurement results and evidence that the measuring instrument comply with specification. This service gives an internationally recognized calibration and fulfils the requirements for calibration according to ISO/IEC 17025. e.g to fulfil the requirements in QS 9000 and ISO/TS 164949.

Metrological confirmation:

  • Calibration at an accredited laboratory and test for compliance with the given specification.
  • Adjustment when the measuring instrument does not comply with the specification, where possible.2
  • Calibration certificate issued by an accredited laboratory stating compliance or non-compliance. Measurement results are reported for each instrument point.1
  • Records of the calibration certificate and measurement results are stored for 6 years.
  • Sealing and labelling as "Calibrated".

Traceable Calibration

When you need evidence that the measuring instrument comply with specification. This service gives a traceable calibration that fulfils the requirements in ISO/IEC 17025, ISO 9000 and ISO10012.

Metrological confirmation:

  • Calibration and test for compliance with the given specification.
  • Adjustment when the measuring instrument does not comply with the specification, where possible.
  • Calibration certificate including measurement results stating compliance or non-compliance. Measurement results are reported for each instrument point.1
  • Records
  • Sealing and labelling as "Calibrated".

The calibration usually covers the complete specified range, but can be customized to your needs3. Measurement points are selected in accordance with the manufacturer's performance test or equivalent.

The measurement procedures and the test equipment are selected to ensure traceability to national and international standards.

The uncertainty of measurement is accounted for when performing a compliance or non-compliance test. If the measuring instrument does not comply with the specification after adjustment or repair is needed, the customer is contacted before any further action.

(1) When adjustments are performed, measurement results are reported for the actual points.

(2) You can order not to perform any adjustments, e.g. for reference equipment where calibration history is important.The measuring instrument is then shipped, no matter if it comply with the specification or not.

(3) The complete specification refers to relevant parts of the specification.When performing accredited calibrations, where not all of the parameters are covered by the accreditation, the calibration will be complemented by non-accredited measurements to cover the complete specification.When the complete specification cannot be covered, the equipment is labeled "Limited calibration".

Element Metech holds one of the widest ranges of calibration accreditations in Europe which means we can supply all need for calibration to our customers in many different sectors.

ISO/IEC Accreditation 

Our European laboratories are accredited by the national accreditation body for each country - all using the same international standards and requirements. For more information about our ISO/IEC 17025 Accreditation in each country:

Sweden

Finland

Denmark

Germany

Czech Republic

ISO 9001 and ISO 14001 Certification

ISO 9001 Certificate

ISO 14001 Certificate (Sweden)


 

 

Pipettes accuracy and precision is dependent of the service and treatment each pipette is exposed to. It may be necessary to perform preventive maintenance, so the pipette not differs from its tolerance limits. The only way to determine this is by calibrating your pipette.

Extent

We offer ISO 17025 accredited calibration of pipettes in the range of 0.1 µl. to 50000 µl.

Element Metech offers accredited calibration of all types of pipettes (single channel and multi-channel) and we prefer to do it with the customer own pipette tips (in aim to get a production like calibration as possible).

Documentation of the calibration is stored at Element Metech and thereby contributes to the each pipette history continuously can be analyzed. As our customer you can receive a digital signed calibration certificate in MIO* or a paper certificate with your pipette.

Calibrations are performed according to ISO 8655 and NCCLS guidelines with reference equipment traceable to national and international Standards.

Test and service

In connection with the calibration carried out leak test of the pipette in order to detect whether it is mechanically close and the piston in optimum condition. We are also able to adjust and repair pipettes and to ensure the final result, completed service with a calibration.

When you submit

In order for us to provide fast and accurate service we ask you to fill in the order form we have for calibrating of pipettes. This is especially important if you have pipettes not been with us before.

 

*MIO (Metech Instrument Organizer) is Element Metech's user friendly web based application to help you keep track of your instrument fleet, with easy access to calibration status, history and certificates.

 

Element Metech is the go-to team for all your calibration needs.

Contact our team

Contact our team: Make an Inquiry or Request a Quote

Accredited services

This service gives an internationally recognized calibration and fulfills the requirements for calibration according to ISO/IEC 17025. e.g to fulfill the requirements in QS 9000 and ISO/TS 164949. Read more

Traceable services

This service gives a traceable calibration that fulfills the requirements in ISO/IEC 17025, ISO 9000 and ISO10012. Read more